Attention should be paid to the installation of lamps and lanterns. The following measures are recommended: Conventional lamp shading Angle is based on the normal elevation Angle of human vision 30 degrees, lamp shading Angle is greater than 30 degrees, in order to avoid the light directly into the human eye. 1, the selection of lamps built-in anti-glare baffle or increase Gershan, in order to increase the lamp shading Angle (light edge point and the lamp outlet between the line and the horizontal line Angle), reduce the generation of glare. 2, control the projection direction of the lamp, try to avoid the normal range of people's activities, reduce glare. 3. Control the projection Angle of the luminaire, so that the elevation Angle of the luminaire installed on the edge of the opposite site is above 30° to reduce the generation of direct glare. 4, the use of low gloss surface decoration materials, reduce the generation of reflective glare
Jiangmen Kunxin New Material Technology Co., Ltd has got over 10 years in Polycarbonate sheets and Acrylic Sheets manufacturing and supplying, and achieve two brand "J.K Optics" and "KunXin plas", which specialize in the optical Acrylic and Polycarbonate diffusion sheet and Textured Acrylic Panel manufacturing separately , has been serving the lighting industry & decoration material market for more than 10 years, products included: Light Diffuser.Optical Diffuser Film & Reflector.Light Guide Plate.Clear Acrylic Sheet.Reeded Or Stripe Acrylic Sheet.Textruded Acrylic Sheet;
